GFAKER GF TUTORIAL

Installation Method One:

Please visit this address to provide the UDID we need https://forms.gle/6Vp5UtfkgwUefivY6

If you have sent us the UDID info ( Before Sunday, July 30, 2023 (EDT)). Please try to visit this link to install the app:https://appho.st/d/jqYksBtU

Developer Mode Required?

Please go to Settings – Privacy&Security – Developer Mode, Then make it on.

The control APP will be bundled with iPhone. The app we generate for your iPhone cannot be installed on other iPhones. We provide two installation times for each order. That means we can provide app installation for two of your iPhones. So please provide the UDID of the iPhone you always use.

Installation Method Two: (EXPIRED)

This is the alternate installation method, installation method one can take some time. You can use this installation method first.

Just visit this link to install: https://appho.st/d/2ioKCorR

Untrusted Enterprise Developer?

Please go to Settings – General – Device Management – China Mobile Suzhou Software – Trust

How to Connect the Device

1. Make sure that you have installed the app ‘GF’ successfully.
2. Press the power button on the right side of the device to turn on the device.
3. Unlock the iPhone screen.
4. Connect your iPhone and GF device with the USB-A to Lightning cable.
5. After seconds, the iPhone will prompt “Trust This Computer?“, select “Trust“, and enter the password (if any).
   Will not be prompted to trust again until the device restart
6. ‘User Agreement’ will pop up. Read the content and agree. Tap the start button. 
7. If the red dot has been displayed for a long time and there is no ‘User Agreement’ prompt on the screen, you can try the following steps to reconnect:(1) Re-plug the cable, or (2) Restart the external device, or (3) Restart the phone.

Tutorial For the APP

1. Once you finish installing the app. Tap the icon to open it. Allow the GF app to use your location – ‘Allow while using app’.
2. Tap ‘OK’ to allow GF to use Bluetooth.
3. Connect your iPhone and the GF Device  

• With the Classic function (which corresponds to the function of old hardware Gfaker Phantom), you can simulate your position steadily and without distance limitation, but there is still no altitude data in the simulated data.

• With the Pro function (which corresponds to the function of old hardware Gfaker Pro ), we have been able to break the limitation that the Gfaker Pro could only simulate addresses within about 15km away from your real location. The simulated data contains all the required data and, of course, altitude data. However, this breakthrough is not stable at the “Ultra Long Distance” simulation (e.g. distances greater than 2000km). The farther the simulated location is from the real location, the shorter the simulated location will be maintained. But when the simulated distance is not “Ultra Long Distance” (e.g., hundreds of kilometers), it is stable.

Button/Charge

1. Charge
   • Use the Lightning port or TYPE C port to charge the GF device. After the battery is fully charged, it can work continuously for 7-8 hours. DO NOT USE FAST CHARGING TO CHARGE THE GF. Or damage may occur.
   • When the device is connected to the mobile phone and plugged in the charger, it will charge the mobile phone and the device at the same time. The charging current of the mobile phone is lower than 1A, and the efficiency is not high.
   • When the charger is not plugged in, the iPhone screen (probably) will show the charging icon, and the phone is not actually in the charging state.
2. Power Switch
   • Press once the power button to turn on and press twice to turn off.

• With the Classic function, you can simulate your position steadily and without distance limitation, but there is still no altitude data in the simulated data.

• With the Pro function, we have been able to break the limitation that the Gfaker Pro could only simulate addresses within about 15km away from your real location. The simulated data contains all the required data and, of course, altitude data. However, this breakthrough is not stable at the “Ultra Long Distance” simulation (e.g. distances greater than 2000km). The farther the simulated location is from the real location, the shorter the simulated location will be maintained. But when the simulated distance is not “Ultra Long Distance” (e.g., hundreds of kilometers), it is stable.